Two quotes for the same Grade 2 plate can differ by a factor of two, and neither supplier needs to be lying. Roughly half the cost of a finished titanium mill product is the sponge input; the rest is vacuum melting, hot working, pickling, testing and certification, and those conversion steps do not fall just because sponge does. In one published 2026 snapshot a 6 mm hot-rolled Grade 2 plate was about ¥77/kg while 0.5 mm cold-rolled Grade 2 was about ¥170/kg — a ¥93/kg gap between metal with identical chemistry, mill and standard, because yield falls from roughly 80–85% to 55–60% and the scarce resource is thin-gauge rolling hours, not titanium. Boundary: the figures below are indicative ranges from trade publications for the 2025–2026 period, not our offer and not a commodity-exchange print; they exist to show which variables move a quote. Ask your supplier for a firm price against the checklist at the end. See our live titanium price index for the market snapshot this article explains.
How to read the numbers. We are a stockholder and light fabricator in Baoji, not a commodity desk or a standards body. Every price figure here is marked approximate, attributed to the trade publication or data source it came from, and dated to the 2025–2026 period. Several of the sources are commercial price guides from the same supplier group, so they show the shape of the market rather than independent confirmation of a single number. Currency is labelled: ¥/kg is a domestic Chinese snapshot, USD/kg is an indicative export band before freight and duty. None of these is a quotation. Your price depends on the variables in this article, and the only reliable number is the one a supplier confirms against your written specification.
| Variable | Typical spread | Why it moves | What to freeze on the RFQ |
|---|---|---|---|
| Sponge input | ~half of finished cost | Kroll process: Mg + TiCl4 + electricity | Do not haggle on a spot print; ask the cost basis |
| Thickness | 6 mm ¥77 vs 0.5 mm ¥170/kg | Yield 80–85% → 55–60%; rolling hours | Give exact gauge and tolerance |
| Product form | Plate 25–40, foil 80–150 USD/kg | Every conversion step adds cost | Name the form and its standard |
| Grade | TC4 plate 130–145% over TA2 | Harder to roll and machine, more scrap | Cite grade + UNS, not "or equivalent" |
| Tolerance / finish | Bright mirror +15–30% | Extra passes, gauging, surface route | Spec the loosest tolerance that works |
| Certification | AMS 4911 plate 2–3× industrial | Melt practice, UT and records | Name the certificate and revision |
| Quantity | Small lot pays full setup | Heats and rolling campaigns | Accept a stock size or a full heat |
| Duty & freight | 40% US duty on China origin (approx) | 15% general + 25% Section 301 | Write "FOB Ningbo, Incoterms 2020" |
| Paperwork gap | Dual cert raises price | Must satisfy the tighter of both specs | List both standards on the RFQ |
How to use this table: every row is a question your quotation should answer before you compare numbers. A supplier who can explain all nine without checking is usually the one whose price is real. For the market context behind the first row, see the daily titanium price report.
The honest answer to “why do two quotes differ” is that per kilogram is the wrong unit for most titanium orders. Titanium is sold by weight, but what you are paying for is a sequence of energy-intensive steps — Kroll reduction, vacuum arc melting, forging, rolling, heat treatment, pickling, cutting and testing — and those steps scale with gauge, width, tolerance and certification, not just with the mass of metal in the box.
That is why a thin sheet can cost several times the price of a thick plate of the same alloy, and why a two-per-kilogram difference between suppliers is often a difference in what is included rather than a difference in profit. If you want the product background first, start with the Titanium Plate overview; this article is about the price structure behind it.
A commodity ticker, a sponge headline and a supplier quotation are three different things. The ticker follows a financial instrument. The sponge headline is an upstream raw-material benchmark that most buyers never purchase directly. Your quote is a manufactured, certified product with a specific gauge, tolerance and certificate.
According to USGS data cited in a 2026 industry guide, the average import price of titanium sponge into the United States in 2025 was about USD 12/kg, and the US imported all of its sponge. That number anchors the market but it is not a plate price: the conversion chain between sponge and certified Grade 2 plate adds melting, rolling, testing and distribution margins on top. A supplier quoting you a price close to the sponge print is quoting something other than certified mill product.
Trade analyses of Grade 2 (the most traded titanium grade, and the price benchmark for the commercially pure family) consistently put sponge at roughly half the finished cost, with melting the next largest element. The rest is conversion and testing.
| Cost stage | Indicative share | What sets it | Moves with sponge? |
|---|---|---|---|
| Sponge (Kroll) | ~half of finished cost | Magnesium, TiCl4, electricity | Yes, with a lag |
| Vacuum arc melting | Next largest element | Power, crucible, number of melts | Partly |
| Hot working + pickling | Major conversion block | Number of passes; alpha-case removal | No |
| Testing | Smaller but not trivial | Chemistry, tensile, bend, UT/eddy current | No |
| Certification + export packing | Small line item | Cert type, witness, packing spec | No |
The consequence buyers miss: when the conversion margin is large and fixed, a move in sponge barely reaches the finished price. One 2026 analysis worked a ¥1,500/tonne sponge fall through to about ¥1.5/kg on finished plate — roughly 2% of the plate price — and reported that sponge moved 6–7% in two weeks while plate, bar, tube, strip and foil moved 0%. If a supplier re-quotes you downward every time a sponge headline drops, ask which part of the cost stack actually changed.
The single biggest surprise in titanium pricing is what thickness does. Two products with identical chemistry, the same mill and the same standard can be separated by a per-kilogram gap larger than the metal value of either one.
| Product | Indicative price | Material yield | Driver |
| 6 mm hot-rolled Gr2 plate | ~¥77/kg | 80–85% | Full line speed |
| 0.5 mm cold-rolled Gr2 | ~¥170/kg | 55–60% | More passes, anneals, pickling |
| Difference | ~¥93/kg | — | Wider than the metal value of either product |
There are two mechanisms. First, yield: rolling 6 mm down to 0.5 mm consumes more passes, more annealing cycles and more pickling, each carrying scrap and edge-trim loss. Second, capacity scarcity: thin-gauge cold-rolling lines are the constrained asset, they run slower, and the same mill that produces a full tonnage of 6 mm plate makes only a fraction of that in 0.5 mm coil. The scarce resource is line hours. When a buyer says “make it thinner, it is less metal”, the mill hears “reserve the bottleneck”. This is one reason our cut-to-size and zero-cut service starts from stock rather than fresh rolling whenever the application allows.
The table below gives the shape of the market, not an offer. Bands are indicative export ranges in USD per kilogram before freight and duty for Grade 2 in the 2025–2026 period, drawn from trade price guides.
| Form | Indicative USD/kg | Principal drivers |
|---|---|---|
| Plate / sheet | 25–40 | Thickness, width, tolerance, finish, quantity |
| Bar / rod | 30–50 | Diameter, length, condition |
| Seamless tube / pipe | 35–70+ | OD, wall, seamless vs welded, length |
| Wire | 40–80 | Diameter, spool weight, temper |
| Foil / strip | 80–150+ | Thickness, width, temper, surface |
| Fasteners / machined parts | 50–200+ | Machining complexity, lot size, finishing |
Read across the rows rather than down them: the price climbs with every conversion step from plate to wire to foil, and again with machining. A fittings or flange order is priced on raw material plus fabrication complexity and lot size, which is why a per-kilogram comparison against plate is meaningless. If you need a current market number before quoting, use the price index and then lock the variables below.
The fastest way to make two quotes comparable is to send the same specification to every supplier. These are the fields we ask for; copy them into your enquiry and the numbers come back on one basis.
|
What to send us for an exact titanium quote Copy these nine lines into your enquiry. A complete spec means a firm price on the first reply, not a second email asking for the grade. |
||||||||||||||||||||
|
||||||||||||||||||||
|
Ready? Copy the nine lines above into the Requirement Details box on our Request a Quotation page and we will come back with a firm price and a dispatch date within 24 hours. |
Buyers often assume Grade 5 or its Chinese equivalent TC4 is expensive because of the alloying elements. The alloy addition is the small part; the processing is the large part.
| Product form | TC4 premium over TA1/TA2 | Reason |
|---|---|---|
| Ingot | ~10–15% | Alloying addition only, modest |
| Plate 5–10 mm | ~130–145% | Harder to roll; more conditioning and scrap |
| Wire 1–2 mm | ~50–75% | Slower drawing, more tool changes |
The raw-material gap between commercially pure titanium and Ti-6Al-4V is modest, roughly 10–15% at ingot, but it widens dramatically once the alloy has to be rolled or drawn: Ti-6Al-4V is harder to work, needs more frequent tool changes, runs slower and generates more scrap. Grade 1 normally trades close to Grade 2, while Grades 3 and 4 carry a modest premium because tighter interstitial control narrows the rolling window. For the designation detail behind these names, see our ASTM / GB / EN equivalence guide.
A standard Grade 2 certification package includes chemistry for every heat, tensile testing, a bend test and dimensional inspection. Everything beyond that is a choice, and each choice adds cost and lead time.
| Level | What it adds | Price effect |
|---|---|---|
| Standard package | Chemistry per heat, tensile, bend, dimensional | Included in the base price |
| Added NDE | Ultrasonic, eddy current on tube, intergranular test | Adds cost and lead time |
| Third-party witness | EN 10204 3.2 with a named witness | Agreed before manufacture, not added later |
| Dual specification | Must satisfy the tighter requirement of both | Price rises with no change to the metal |
Dual certification is the quiet one. If a PO names two specifications, the mill must satisfy the tighter requirement of both — tighter chemistry ceiling, more tests, or a broader inspection scope — even though the metal in the box is unchanged. That is a real cost, not a margin. Our EN 10204 3.1 mill certificate page sets out which fields appear on the certificate so you can see what you are paying for.
Melting and rolling campaigns are scheduled in heats. An order that cannot be combined with other demand carries the full setup cost, which is why a small quantity has a high per-kilogram price that has nothing to do with the metal. Buying a full heat quantity, or accepting a standard stock size, is usually the single most effective way to cut the unit price.
This is also where a stockholder differs from a mill. We hold about 800 t of titanium, nickel and zirconium across plate, tube, bar, wire, fittings, flange and fasteners, so a small order can be taken from existing stock rather than starting a campaign. That is the reason stock sizes can dispatch the same day and why one plate or one spool is a normal order for us.
Every procurement engineer eventually sees a price that looks impossible. There is always a reason, and it is rarely a bargain. A quote below the plausible cost floor usually means one of five things: a different grade sold under a familiar name, a basic certificate where the drawing requires a witnessed one, a looser tolerance than the one you asked for, mill finish substituted for a specified surface, or the phrase “or equivalent” doing unenforceable work.
The right response is not to accuse the supplier but to ask for the fields. Request the heat number, the measured chemistry, the certificate type and the exact tolerance, and compare them line by line with the expensive quote. If the cheap quote still holds up, you have found a real efficiency. If it dissolves, you have avoided a failed incoming inspection. We will say plainly when a price we cannot match reflects a specification difference rather than our margin — that answer is more useful than a number that will not survive receiving inspection.
Even a perfectly compared ex-works price is not your landed cost. For a US buyer the gap can be larger than the negotiation on the plate itself.
| Cost layer | What it covers | Action |
|---|---|---|
| Ex-works / FOB price | Product + export clearance; risk transfers at loading | Write "FOB Ningbo, Incoterms 2020" |
| Ocean freight + insurance | Port to port | Ask for FCA if you ship in containers |
| Import duty | HTS 8108.90.60: 15% general + 25% Section 301 on China origin (approx, late 2026) | Confirm with a licensed broker; rate follows entry date |
| Clearance + broker fees | Entry filing, handling | Not part of an FOB quote |
| Incoterm choice | DDP still leaves the buyer as importer of record | Name the term and the named place |
| Incoming inspection | PMI, light elements, heat-number match | Write the inspection scope into the PO |
Two notes that save repeated arguments. First, containerised cargo is usually cleaner under FCA than FOB, because FOB is designed for break-bulk and the risk transfer point does not match how containers are handed over. Second, under DDP the buyer is normally still the importer of record, so the duty and compliance obligation does not disappear because the seller arranged delivery. Our China sourcing guide covers the duty and DFARS position in detail; the figures there are dated and should be rechecked with a broker at the time of entry.
There are orders where comparing per-kilogram numbers actively misleads. Naming them is part of a straight answer.
| Condition | Why price per kg fails | What to do instead |
|---|---|---|
| A custom machined component | Price per kg stops being the right unit once machining dominates | Quote per finished part, not per raw kilo |
| Aerospace or implant order | The AMS or F136 envelope, not the grade price, controls the order | Quote to the named specification and revision |
| Corrosion-critical service | A cheaper grade can cost the whole vessel in a chloride crevice | Choose by medium; request coupon data — see the failure casebook |
| A one-off or urgent gauge | Capacity reservation dominates the metal cost | Accept a stock size and confirm dispatch lead time |
| US defence work | Chinese melt is not qualified under DFARS specialty-metal rules | Decline honestly; point buyer to a qualified chain |
Outside this table, price comparison is a normal procurement step. Inside it, the specification controls and the number follows. The same discipline applies across material families: our alloy family matrix splits duties by stream for exactly this reason.
If you are holding two quotes that do not reconcile, send both specification sets through our request a quotation page. A named engineer will return the differences in writing — gauge, tolerance, certificate, inspection and landed duty — within 24 hours, so you are comparing like with like.
When a quotation arrives, read it in this order. First, does it name the product standard and revision, or only a grade? Second, does the gauge carry a tolerance, or is it a nominal thickness? Third, what condition is supplied — annealed, cold-worked, or a numbered temper? Fourth, is the certificate type stated, and is it 3.1 or 3.2? Fifth, is the quantity a stock size or a new melting campaign? Sixth, is the Incoterm written with a named place? A quote that is vague on three or more of these is not yet comparable, whatever the number says.
One practical test: ask the supplier to restate the quote on the exact wording of your RFQ. If the price changes after the fields are made explicit, the original number was priced on a different basis. That is not dishonesty; it is the normal result of an under-specified enquiry.
Ten lines turn a price shopping exercise into a comparable quotation. Send them together rather than one at a time, and the answers come back on a single basis.
| # | Field | Example entry |
|---|---|---|
| 1 | Form + product standard | Plate ASTM B265 / tube B338 / bar B348 |
| 2 | Grade + UNS + revision | Gr2 UNS R50400, B265-20 |
| 3 | Exact gauge and tolerance | 6.0 mm ±0.1 mm, not "6 mm approx" |
| 4 | Condition | Annealed / cold-worked / 2H — state it |
| 5 | Quantity + stock-size option | 500 kg, or accept a standard stock size |
| 6 | Certificate type and revision | EN 10204 3.1; 3.2 with named witness if needed |
| 7 | Inspection scope | PMI, measured O/N/H/C, UT class |
| 8 | Service medium and temperature | Seawater 30°C — drives grade, not just price |
| 9 | Target delivery | Stock size same day; cut-to-size by agreement |
| 10 | Incoterm + named port | "FOB Ningbo, Incoterms 2020" |
The two lines buyers most often forget are the stock-size option and the service medium. The first can change the price more than a negotiation; the second can change the correct grade altogether. If you are unsure which grade the medium calls for, our tube selection guide and the failure casebook are the right starting point before you ask for a number.
We are a stockholder plus light fabricator in Baoji, the centre of China’s Titanium Valley. A price article is the natural place to say how we work, because our model is built around the variables above:
Start with plate, tube, bar, wire, flange or fittings; each page lists the forms, sizes and certificate options that drive the price.
|
Get a firm titanium quote within 24 hours Same-day dispatch from ~800 t of Baoji stock · cut-to-size and waterjet blanks · free drawing review by our engineering team · EN 10204 3.1 MTC with every lot. |
Request my quote →
No obligation. A named engineer replies, not an auto-responder. |
|
EN 10204 3.1 MTC on every lot · ISO 9001 quality system · ASTM / ASME / GB standard literacy · Third-party inspection (SGS / BV) on request · Mill heat & lot traceability · Export packing & full documentation |
Because the grade name is only about half the story. Sponge titanium is roughly half of a finished mill product’s cost; the rest is vacuum melting, hot working, pickling, testing and certification. Two suppliers can both quote Grade 2 and differ on thickness tolerance, surface finish, certificate type, inspection scope and order quantity. Confirm those five fields before comparing the per-kilogram figure.
Only partly. In one 2026 trade analysis the conversion step was about 43% of a 6 mm plate price and over 98% of foil, while sponge had moved 6-7% and the finished products had moved 0%. A fall in sponge passes through to a finished plate only in small amounts, because the fixed-cost part of conversion does not move. Treat the spot print as a trend signal, not as your quote.
Rolling 6 mm down to 0.5 mm needs more passes, more annealing cycles and more pickling, and each step loses metal to scrap and edge trim. Indicative yield falls from roughly 80-85% for 6 mm plate to 55-60% for 0.5 mm coil. Thin-gauge cold-rolling lines are also scarce, so you are reserving capacity as much as buying metal.
Trade publications put Grade 2 plate and sheet at roughly 25-40 USD per kilogram on an export basis before freight and duty for the 2025-2026 period, with bar around 30-50, seamless tube 35-70 and foil 80-150. These are planning bands, not offers; thickness, width, tolerance, finish, certification and quantity move the real number. Ask a supplier to quote against a written specification.
Not necessarily. A low number can hide a looser tolerance, a mill finish where you needed bright annealed, a basic certificate instead of the one your drawing calls for, or the phrase 'or equivalent'. Rejects and rework at incoming inspection can erase the saving. Compare delivered cost per accepted part, not the headline per-kilogram figure.
For US imports of HTS 8108.90.60, an indicative 2026 figure is 15% general duty plus 25% under Section 301 on Chinese origin, around 40% in total. Section 232 does not currently cover titanium mill products. Rates depend on the entry date and the exact subheading, so confirm with a licensed customs broker before committing; see our China sourcing guide for the full breakdown.
Send form and product standard, grade with UNS and revision, exact gauge and tolerance, condition, quantity and whether you will accept a stock size, certificate type, inspection scope, service medium, delivery target and Incoterm with a named port. With those ten lines a supplier can quote on one basis. Stock sizes can often be confirmed the same day.
Per kilogram is the last number to compare, not the first. Sponge is roughly half a finished mill product’s cost; yield, thickness, tolerance, finish, certification, quantity and landed duty decide the rest. One 2026 snapshot put 6 mm Grade 2 near ¥77/kg and 0.5 mm near ¥170/kg for the same alloy — because you are reserving rolling hours, not buying metal. Send the ten-line checklist through our request a quotation page; a named engineer will return a firm price, the specification basis and the landed-duty note within 24 hours.
Need a quote on this specification?
Click below and your email app opens with the 6-point RFQ already typed out. Just fill in your grade, size and quantity - no form, no captcha.
Prefer the web form? Open the inquiry page and paste the 6 points into the message box.
Baoji Titanium Valley · ~800 t stock · cut-to-size · drawing-based machining · ASTM / ASME / GB · export-ready · same-day quote.
Contact Person: Wang Xiaoning
Tel: +86-917-355-7966
Email: [email protected]
WhatsApp: +86 188 2967 9311
Company: Shaanxi Qianyi Tuoda Technology Co., Ltd
Address: Floor 4, Building 4, No. 188 Gaoxin Avenue, High-tech Zone, Baoji City, Shaanxi Province, China