Baoji · Shaanxi · China  ·  ISO 9001:2015  ·  800+ t in stock
Materials — by grade Products — by form Industries Tools & calculators Technical guides News & notes Case deliveries About & factory Quality & certificates Contact / RFQ Request a quote
Home/Tools/Titanium weight calculator
Free tool · no sign-up · works offline once loaded

Titanium weight calculator

Estimate the theoretical mass of plate, round bar, square bar, hex bar, tube or disc from nominal dimensions and published grade density. Weight drives freight, freight drives landed cost — so get this number before you ask us for a price.

重量计算工具

V = L x W x T · m = V x rho

Result is a theoretical geometry × density figure. Actual mass varies with mill tolerance on thickness and diameter, and with any facing or pickling allowance. Verify with the MTC before you commit a freight booking or a lifting plan.

Per-piece weight (check)
—

常用密度说明

Typical densities we use

Gr1–Gr4 CP · 4.51 g/cm³ (0.163 lb/in³)
Gr5 / Gr23 · 4.43 (0.160)
Gr9 · 4.48 (0.162)
Gr7 · 4.54 (0.164)
Ni 200 / 201 · 8.89 (0.321)

Density is not a specification requirement, so these are not guaranteed values. 1 g/cm³ = 0.036127 lb/in³; 1 lb = 0.45359237 kg.

Get a price on this weight Compare grades instead

How the calculation works

Mass is density multiplied by the volume of solid metal. For a constant cross-section that means density × cross-sectional area × length, so the only real judgement is which area formula matches the product form you are buying.

ShapeVolume formulaWatch out for
Plate / sheetV = L × W × TUse actual thickness, not nominal — 6 mm often ships at 6.2 mm
Round barV = (π/4) × D² × LTurned bar loses material to the turning allowance
Square barV = S² × LCorner radii make this a slight over-estimate
Hex barV = (√3/2) × F² × LF is across flats, not corner to corner
TubeV = (π/4) × (OD² − ID²) × LWall tolerance at the thin end moves weight by several percent
Disc / flange blankV = (π/4) × (D² − ID²) × TSet ID = 0 for a solid blind flange blank

Worked example — the coil on the Gr2 plate page

A Gr2 plate at 2500 × 1200 × 3 mm gives 9,000 cm³. At 4.51 g/cm³ that is 40.59 kg per sheet. Twenty-one sheets is 852 kg, which is roughly what one 2.5 t pallet slot takes — so a 21-coil lot is a predictable freight shape, not a guess. The same maths on Gr5 at 4.43 g/cm³ gives 39.87 kg, about 1.8 % lighter for the same volume.

Why the freight number matters more than people expect

On a 20 t titanium order, a 2 % error in estimated mass is 400 kg — usually more than the margin between a container fitting and a second container being needed. Buyers who estimate from nominal dimensions and then discover the mill tolerance at the port end up renegotiating freight, which delays the project and the payment terms.

Use the tolerance, not the nominal. If you are quoting a project budget, calculate at the maximum thickness your specification allows and you will not be surprised. We state our tolerance band on every product page.

Other tools

其他工具

Questions people ask about this calculator

No. It is a budgeting and freight-planning tool. For lifting, rigging or a structural calculation, use the certified weight on the MTC for the actual lot.

The aluminium and vanadium in the alpha-beta structure give a slightly lower packing density than commercially pure titanium — 4.43 against 4.51 g/cm³. Gr5 is about 1.8 % lighter per unit volume and roughly twice as strong.

Yes — Ni 200 and Ni 201 are in the grade list at 8.89 g/cm³. For Monel, Inconel or Hastelloy, choose Custom and enter the supplier’s published density.

No. The calculator runs entirely in your browser, sends nothing to us, and works offline once the page has loaded.

Sources: ASTM B265 / B348 / B337 nominal dimensions; grade densities as published mill reference values.·Reviewed October 2026