Welcome to Shaanxi Qianyi Tuoda Technology Co., Ltd
EnglishРусский中文
Titanium Metal News

How to Buy Titanium from China: Duties, Incoterms & RFQ

Buying titanium from China is low risk once you control three things the quotation never shows: the melt origin, the certificate fields and the Incoterm that moves risk. The numbers matter. As of late 2026 titanium mill products under HTS 8108.90.60 carry a 15% US general duty; Chinese origin adds 25% under Section 301, for 40% in total — but no Section 232 tariff applies to titanium mill products, whatever the “critical minerals tariff” headlines imply. For US defence work the answer reverses: DFARS 252.225-7008 / 7009 requires the specialty metal to be melted in the United States or a qualifying country, and China is not one. Boundary: duty rates change by entry date, not by PO date, and this article is information, not customs advice — confirm your classification with a licensed broker. The At a Glance table maps each decision to the number, the clause and the cost of getting it wrong.

How to read the numbers in this article. Tariff and procurement rules are dated facts: each figure below carries the source and the date we checked it, because a rate that was correct in the morning can be superseded by an entry-date change in the evening. We are a supplier, not a customs broker or a defence contractor, and we say plainly where a question belongs to your broker or your contracts department. That is more useful than a confident number with no owner.

At a Glance: Six Decisions Before You Send an RFQ

Decision What to check The number or clause Cost if ignored
Tariff route HTS code + country of origin 8108.90.60 = 15% general; China + 25% Section 301 = 40%; no Section 232 on Ti mill products A landed cost wrong by 25 points, quoted in good faith
Defence clause Is DFARS 252.225-7008 / 7009 on the prime contract? Melt must be US or a qualifying country; China is not; simplified acquisition threshold $350,000 Part rejected on receipt, plus False Claims exposure upstream
Supplier chain Melt shop, heat number, mill certificate Heat number hard-stamped on every piece; EN 10204 3.1 per heat Grade substitution that a handheld PMI gun cannot detect
Incoterm Full term + named place + version FOB / CIF risk passes on board in China; FCA is cleaner for containers Insuring a leg you do not control, or paying hidden destination charges
Certificate 3.1 or 3.2 fixed before manufacture 3.2 needs third-party or purchaser witness; cannot be upgraded afterwards Re-melt, re-test or outright rejection of the lot
Cut and dispatch Stock item versus mill order About 800 t Baoji stock; cut-to-size; stock sizes can dispatch the same day An 8–12 week mill lead time you did not budget for

How to use this table: every row becomes one line on a purchase order. A supplier who can answer all six without hesitation is worth a sample order; one who cannot is telling you where the risk will land.

1. The Short Answer: Three Clauses Decide Everything

The question “can I buy titanium from China?” has no useful yes-or-no answer. The right question is: which three clauses will decide whether this order lands cleanly? For a chemical plant, a desalination line or a heat-exchanger rebuild, Baoji is one of the most efficient sourcing points in the world: deep stock, fast cutting, drawing-led fabrication and export paperwork that brokers recognise. For a US defence article covered by the specialty-metals clause, the same order is disqualified before a quote is requested, because the melt happened in the wrong country. Everything between those two extremes is decided by how precisely you write the grade, the certificate and the delivery term.

That is why this guide is written as a sequence of decisions rather than a country profile. Each section ends with a check you can put in a purchase order. If you want the product background first, start with our Grade 2 plate to ASTM B265 or Titanium Plate overview; this article assumes you already know roughly what form you need and focuses on buying it well.

2. The “Section 232 Taxes Titanium” Myth

What people say: critical minerals are under Section 232, titanium is a critical mineral, therefore Chinese titanium carries a Section 232 duty. It is repeated in good faith across freight blogs and even some supplier pages.

What the schedule actually says: the Section 232 investigation into processed critical minerals ended with Proclamation 11001 of 14 January 2026, which chose negotiations rather than tariffs. The 2026 Harmonized Tariff Schedule (Revision 20, Chapter 81 and Chapter 99, in force from 28 September 2026) lists no Section 232 duty on titanium mill products. The 25% that Chinese titanium really pays comes from the earlier China-specific Section 301 action, not from 232.

Date in 2026 Action Effect on titanium mill products
14 Jan 2026 Proclamation 11001 on processed critical minerals Chose negotiations over tariffs; the tariff schedule lists no Section 232 duty on titanium
20 Feb 2026 Supreme Court ruling on IEEPA + Executive Order 14389 IEEPA “reciprocal” duties ended; this is a different authority from Section 232
24 Feb – 23 Jul 2026 Section 122 temporary 10% surcharge Titanium mill products exempt; the surcharge has since expired
24 Jul 2026 New Section 301 duties on 60 economies Titanium subheadings 8108.20.00 / 8108.30.00 / 8108.90.30 / 8108.90.60 exempt from the new round
Still in force China-specific Section 301 from the earlier round 25% on titanium mill products — the 40% total is 15% + 25%, not a Section 232 number

Why the distinction is worth money: Section 232 and Section 301 have different scopes, different exemption logic and different drawback treatment. A buyer who quotes the wrong one miscalculates the landed cost and argues from the wrong clause when the invoice arrives. For the exact rate on your entry, the document that matters is the current HTS revision and your broker’s classification — not an article, including this one.

3. The Real 2026 Duty Numbers on Titanium Mill Products

Titanium mill products are classified in HTS Chapter 81, primarily subheading 8108.90.60, with the rate depending on form. These are ad valorem rates only: they exclude fees and any antidumping or countervailing duty, and they were checked against HTS 2026 Revision 20.

Form HTS subheading Duty (late-2026 reference)
Bars, rods, profiles, wire 8108.90.60.31 15% general; +25% Section 301 for China
Plates, sheets, strip, foil 8108.90.60.45 15% general; +25% Section 301 for China
Tubes and pipes 8108.90.60.60 15% general; +25% Section 301 for China
USMCA-qualifying origin Chapter 99 schedule Free where the agreement applies — check the current note
Russia (Column 2) 8108.90.60 45% general Column 2; the separate 70% action covers unwrought Ti, powder and scrap, not mill products

Two details catch people out. First, the entry date controls the rate, not the purchase-order date, so a rate change between quote and shipment produces a different number at the border. Second, Section 232 and Section 301 duties on other metals are additive when both apply; for titanium in 2026 the 232 layer is simply absent. If a supplier quotes “15% plus everything included”, ask them to write the HTS subheading and the origin on the quotation. An exporter that names the code is easier to audit than one that names a total.

One more source of confusion: the additional 70% action on some Russian products covers unwrought titanium, titanium powder and scrap, not titanium mill products. Coppering a scrap rate onto a plate quote produces a number that is both alarming and wrong.

4. DFARS: The Clause That Disqualifies Chinese Titanium

Here is the honest part of this guide. If your titanium ends up in a US Department of Defense article covered by the specialty-metals restriction, a Chinese melt is generally not acceptable — and no amount of price advantage changes that.

The statute is 10 U.S.C. § 4863, renumbered from 2533b in 2022; the implementing clauses are DFARS 252.225-7008 for mill products and 252.225-7009 for articles containing specialty metal, with policy at DFARS 225.7003. Titanium and titanium alloys, zirconium alloys, nickel and cobalt alloys and covered steels are specialty metals. The test traces to the earliest processing stage: a titanium forging machined into a bracket in Ohio still fails if the sponge was melted in a non-qualifying country. China is not among the 28 qualifying countries.

Element Reference What it means for a buyer
Statute 10 U.S.C. § 4863 (renumbered from 2533b in 2022) Bars DoD from acquiring covered items containing specialty metal not melted or produced domestically
Implementing clauses DFARS 252.225-7008 and 252.225-7009; policy at 225.7003 7008 for mill products, 7009 for articles containing specialty metal; both flow down to subcontracts
What is a specialty metal Titanium and titanium alloys, zirconium alloys, nickel / cobalt alloys, covered steels China-melted titanium bar machined in Germany still fails the test
Qualifying countries 28 countries with reciprocal defence procurement agreements China is not on the list; Australian, Japanese, UK and most EU melts are
Threshold Simplified acquisition threshold $350,000 (raised 1 Oct 2025) Acquisitions at or below it are exempt under DFARS 225.7003-3(a)(1)
COTS exception Commercial off-the-shelf items generally excepted Does not cover specialty-metal mill products before they are incorporated into a COTS end item
FY2026 NDAA From 1 Jan 2027: mined, refined, separated, melted or produced Expands the test beyond melt; new covered nations and materials, with waivers
Consequence of false certification False Claims Act, 31 U.S.C. § 3729 Per-claim penalties roughly $14,308–$28,619 after the 2025 adjustment, plus treble damages

Where the exceptions are narrow. The simplified acquisition threshold rose to $350,000 on 1 October 2025 and acquisitions at or below it are exempt. The COTS exception generally helps commercial off-the-shelf items, but it does not cover specialty-metal mill products — bar, billet, slab, wire, plate or sheet — before they are incorporated into a COTS end item. A machine shop three tiers down is under the same rule as the prime. False certification is not a paperwork detail: 31 U.S.C. § 3729 exposes the certifier to per-claim penalties and treble damages.

What is changing next. The FY2026 NDAA expands the test from 1 January 2027 to material that is mined, refined, separated, melted or produced in a covered nation, and adds materials and waiver alignment. If your programme has a long life, raise this with your contracts department now, not at the next delivery order. For non-defence chemical and marine work none of this applies, and the alloy family matrix shows how mixed-material lines are normally kitted.

5. Qualify a Baoji Supplier in Seven Questions

China has hundreds of titanium traders and a much smaller number of stockholders who can actually certify, cut and export a part. Seven questions separate them in about ten minutes. Send them by email and judge the specificity of the answer, not the confidence of the tone.

# Question A good answer A warning sign
1 Who melted it, and can you tie that heat to the certificate? A named melt shop and a heat number on every piece, matching the MTC “We buy from mills” with no heat trace
2 How much is actually in stock today? A tonnage by form and grade, with sizes you can photograph Everything is “available” but nothing has a location
3 Can you cut to my size with no mill minimum? Yes, with a cut list and a same-day dispatch option on stock sizes A mill minimum quietly added at invoice stage
4 Do you read drawings or only sell catalogues? Returns the grade split, the PO wording and a quote from a P&ID or fabrication drawing “Please send the exact item number” for a custom part
5 Which certificate, and who witnesses it? 3.1 as standard; 3.2 with a named witness and hold points agreed before manufacture “We can add 3.2 later”
6 Can third parties inspect before shipment? SGS / BV or your inspector accommodated, with the report in the document pack Inspection refused or billed as an afterthought
7 What is the quote and dispatch promise? Stock and pricing within 24 hours; stock sizes the same day; firm lead time for fabrication “Depends on the mill” with no date

Ask for photographs of the specific pieces reserved for you, with the heat numbers visible. A stockholder that can do this — see how we present zero-cutting, small-quantity plate and cut-to-size stock with same-day dispatch — is operating from inventory. A trader will send a catalogue.

The fastest way to get a firm answer instead of a second email is to send a complete specification on the first enquiry. These are the nine lines we ask for; copy them into your RFQ and any supplier can quote against the same basis.

What to send us for an exact titanium quote

Copy these nine lines into your enquiry. A complete spec means a firm price on the first reply, not a second email asking for the grade.

Spec item Example from a real order
Grade Grade 2 (UNS R50400), commercially pure titanium
Standard ASTM B265 / ASME SB-265, current revision
Form & Size Plate, 6 mm × 1000 mm × 2000 mm, hot-rolled and annealed
Quantity 500 kg (12 sheets), one-off batch
Service medium & temperature Seawater, 30 °C, continuous immersion
MTC type EN 10204 3.1, heat-specific, with melt chemistry and tensile values
Inspection Third-party witness (SGS / BV) before dispatch; PMI on request
Target delivery Ex-works within 5 working days; FOB Shanghai on request
Drawing DXF of cut-to-size blanks, tolerance ±1.0 mm, edges deburred

Ready? Copy the nine lines above into the Requirement Details box on our Request a Quotation page and we will come back with a firm price and a dispatch date within 24 hours.

6. Incoterms 2020: Where Risk Actually Moves

An Incoterm does three jobs and only three: it says who pays each leg, who arranges the freight and where risk passes from seller to buyer. It does not decide ownership, payment terms or who is legally the importer of record. Disputes usually start when a buyer assumes it did.

Term Risk passes Who does what When to use it
EXW — Ex Works At the seller’s door Buyer collects, exports, ships, imports Only with your own China agent; a foreign buyer often cannot do export clearance
FCA — Free Carrier Handed to your carrier at a named terminal Seller clears export; buyer pays the main leg The clean choice for containers and air freight
FOB — Free On Board On board the vessel at the Chinese port Seller loads and clears export; buyer controls ocean freight and insurance The familiar workhorse when you have a forwarder
CIF — Cost, Insurance, Freight On board in China — not at your port Seller pays freight and minimum insurance; you still clear customs and pay duty Convenient, but freight is often marked up and risk passed early
DDP — Delivered Duty Paid At your door, duty prepaid Seller handles almost everything Simple for samples; costs bundled, you are usually still importer of record

The container trap. FOB was written for cargo lifted over a ship’s rail. Most modern cargo is handed to a terminal days before loading, which is exactly the situation FCA was designed for. If your forwarder insists on FOB for a container, ask why; the honest answer is often habit. The CIF trap is different: the seller pays freight and minimum insurance, but risk passes when the goods are loaded in China, and you still clear customs and pay duty at destination. Because the seller chooses the freight, the number can carry a markup that only appears as a high destination charge.

Whatever you choose, write the full term with the named place and the version: “FOB Ningbo, Incoterms 2020”, not just “FOB”. Half the disputes live in the missing place name. Our Baoji titanium tube export terms notes show how the term sits alongside the packing and document list.

7. Reading an MTC: Five Fields That Prove the PO Was Filled

A certificate is evidence only if it carries the right fields. A one-page “mill test certificate” with a grade name, a tensile number and no heat number is not traceability. These five fields are the ones that matter on titanium, and the same logic applies to nickel and zirconium.

# Field to require What it prevents
1 Heat number, hard-stamped on each piece and repeated on the certificate The only thread from your part back to the melt
2 Full measured chemistry including O, N, H and C — not just Al and V PMI cannot see the light elements that separate CP grades and embrittle welds
3 Measured tensile and hardness results, with the test method Catches a strength-driven substitution before it becomes a corrosion failure
4 Product standard and revision, grade and UNS designation “ASTM B265” without a revision or UNS leaves the door open to “or equivalent”
5 Certificate type and signatory — EN 10204 3.1 or 3.2 3.2 requires witness during manufacture and cannot be issued retroactively

Two traps specific to titanium. A handheld PMI gun reads aluminium and vanadium well and cannot quantify oxygen, nitrogen, hydrogen or carbon — the very elements that separate Grade 1 from Grade 4 and that embrittle a weld. Light elements belong to laboratory methods such as ASTM E1409 and E1447. And a 3.2 certificate requires third-party or purchaser-representative witness during manufacture; it cannot be created later by upgrading a 3.1. Our EN 10204 3.1 mill certificate page and the GB/T 3621 versus ASTM B265 comparison show how the document and the standard interact.

8. Samples, First Article and the Hold-Point Sequence

A stockholder order should be fast, but speed does not remove the need for a documented sequence. This is the path we run for a new buyer; the same five steps work with any supplier if you ask for the deliverable at each one.

Stage Typical timing What happens Deliverable you should keep
1. Specification review Before quoting Grade, UNS, standard + revision, form, size, quantity, medium, MTC type A written spec that a second supplier could quote unchanged
2. Stock confirmation Day 1 Heat numbers, actual dimensions, weight, cut plan Photographs of the specific pieces reserved for you
3. Sample or first article Days 2–7 for stock items Dimensions, surface, hardness, chemistry on request FAIR or dimensional report against your drawing
4. Hold points and witness Before release Weld colour class, NDE scope, third-party inspection if required Signed inspection plan with named witness
5. Kitting and export pack Before shipment One grade logic per stream, VCI wrap, seaworthy crate, document pack Packing list reconciled to MTCs and heat stamps

For a stock size, steps 1 and 2 can happen the same day and a first article can ship within a week. Fabricated or welded items add the inspection plan and any witness hold points; that is where a supplier’s standards literacy shows. If you are choosing between tube forms before ordering, the welded versus seamless titanium tube guide explains which one to sample.

If one of these decisions is still open — a grade, a certificate type, an HTS code — send the drawing and the medium through our request a quotation page and a named engineer will return the grade split, the suggested PO wording and a firm dispatch date within 24 hours.

9. Limits and Failure Conditions: When Not to Source Titanium from China

A supplier who says “we can supply anything” is not being helpful. There are orders where a Chinese stockholder is the wrong answer, and naming them early saves both sides time. This is the fixed limits section of this guide.

Condition Why it is a limit What to do instead
US defence article with DFARS 252.225-7008 / 7009 Melt must be US or qualifying country Source a domestic or qualifying-country melt; China cannot be certified here
Contract that demands EN 10204 3.2 with a specific witnessing party Witness must be agreed before manufacture Name the party and hold points at RFQ, or use a supplier with that arrangement in place
Nuclear or low-hafnium zirconium-grade duty Special purity and Hf limits beyond commercial stock Zirconium grade notes explain the split; use a qualified nuclear supply chain
Disputed HTS classification or a first-ever derivative product Duty turns on the code, not the description Ask your broker for a CBP binding ruling before the PO
Very large one-off billet or an unusual melt practice Stockholder model does not replace a mill Go direct to a mill with a metallurgical spec
Programme needing a precedence set of certificates and long archived traceability Document history must pre-date your order Confirm the archive exists before awarding

Everything outside this table is ordinary commercial sourcing: state the specification, fix the certificate before manufacture, choose the Incoterm deliberately and confirm the current duty with your broker. That is a process, not a gamble.

10. Landed Cost: Why the FOB Number Is Not Your Cost

Five numbers make a landed cost, and only the first one appears on a supplier’s quotation. Comparing FOB prices without loading the other four is the most common way a “cheap” source becomes an expensive one.

Cost layer Who bears it Where buyers get surprised
FOB product price The number on the quotation Comparable only if grade, size, standard and certificate are identical
Import duty 15% + 25% for Chinese titanium mill products (late-2026 reference) Entry date controls; verify the current HTS revision
Ocean freight and minimum insurance Your forwarder under FOB / FCA; the seller’s under CIF CIF quotes can hide a markup in destination charges
Broker, port and last mile Always yours regardless of Incoterm DDP bundles it, but you still usually remain importer of record
AD/CVD and fees Separate from the base and Section 301 duties Check whether any order covers your exact product and origin

The practical rule is to compare every quotation on the same Incoterm and the same specification before comparing price. A Grade 5 bar quoted FOB without a heat-specific 3.1 is not the same item as one quoted FOB with it, and a CIF number that looks lower can hide the difference at destination. Ask for the HTS subheading on the quotation as well: classification is a design and documentation decision, not a surprise at the border.

11. Choose by Route, Not by Habit

Choose a Baoji stockholder like us if:

  • The service is chemical processing, seawater, desalination, chlor-alkali or a heat-exchanger rebuild — no DFARS melt restriction in scope.
  • You need one plate, one spool or a kitted line, with zero-cut and no mill minimum.
  • An EN 10204 3.1 MTC with heat numbers and full chemistry meets the specification.
  • You want a 24-hour quote, a drawing review and same-day dispatch on stock sizes.

Choose a different route if:

  • The article falls under DFARS 252.225-7008 / 7009 → source a US or qualifying-country melt.
  • The contract names a 3.2 witness or an archived certificate history → agree it before manufacture, or use a supplier with that arrangement.
  • The item is an unusual billet, a special melt practice or a nuclear-grade product → go to a qualified mill.
  • Your HTS classification is disputed → get a CBP binding ruling through your broker first.

There is no single best source for every order. Specifying by route is cheaper than over-specifying one supplier across a plant, and far safer than assuming a low FOB price covers a certificate you never asked for.

12. Why Source This From Us

We are a stockholder plus light fabricator in Baoji, at the centre of China’s Titanium Valley. The way we work is built around the six decisions at the top of this guide:

  • Cut-to-size, zero-cut, no mill minimum. About 800 t of titanium, nickel and zirconium stock across plate, tube, bar, wire, fittings, flange and fasteners.
  • We read your drawing. Send the P&ID, the fabrication drawing or just the medium declaration; you get the grade split, the PO wording and a quote.
  • Standards literacy. We work across ASTM, ASME and GB, understand why 3.1 cannot become 3.2, and will say so when an order needs a US melt.
  • One shipment, one certificate pack. EN 10204 3.1 MTC per heat, full chemistry including interstitials on request, hard-stamped heat numbers, WPS / PQR and NDE where welded, plus SGS / BV witness if required.
  • Export-ready. VCI protection, seaworthy crating and the documents your broker needs, with the Incoterm and named port written on the quotation.
  • Fast where it counts. Stock and pricing within 24 hours; stock sizes can dispatch the same day; fabrication on a firm quoted lead time.

Start with Titanium Plate, flange, fittings, bar or welding wire; each page gives the forms, sizes and certificate options.

Get a firm titanium quote within 24 hours

Same-day dispatch from ~800 t of Baoji stock  ·  cut-to-size and waterjet blanks  ·  free drawing review by our engineering team  ·  EN 10204 3.1 MTC with every lot.

Request my quote →

No obligation. A named engineer replies, not an auto-responder.

EN 10204 3.1 MTC on every lot  · ISO 9001 quality system  ·  ASTM / ASME / GB standard literacy  ·  Third-party inspection (SGS / BV) on request  ·  Mill heat & lot traceability  ·  Export packing & full documentation

13. FAQ: Buying Titanium from China

Is there a Section 232 tariff on titanium from China?

No. As of late 2026 no Section 232 heading covers titanium mill products. Proclamation 11001 of 14 January 2026 chose negotiations on processed critical minerals instead of tariffs. Chinese titanium under HTS 8108.90.60 pays the 15% general rate plus 25% under the earlier China-specific Section 301 action, for 40% total. Rates change by entry date, so confirm with a licensed customs broker.

What duty will I pay on Titanium Plate imported from China?

For Titanium Plate, sheet and strip the HTS subheading is 8108.90.60.45. The general rate is 15%; Chinese origin adds 25% under Section 301, so the reference total is 40% as of late 2026. USMCA-qualifying origin may be free where the agreement applies. Antidumping, countervailing duties and fees are separate and must be checked for your exact product.

Can Chinese titanium be used on a DFARS defence contract?

Usually no where DFARS 252.225-7008 or 7009 applies. Titanium and titanium alloys are specialty metals and must be melted or produced in the United States, its outlying areas or a qualifying country; China is not qualifying. The COTS exception does not cover specialty-metal mill products before they are incorporated into a COTS end item. Narrow exceptions and waivers exist and belong to your contracts department.

Should I choose FOB or CIF when buying titanium tube from China?

If you have a freight forwarder, FOB gives you control of the main leg and a visible freight cost. For containerised or air cargo, FCA is often cleaner than FOB because risk passes when the goods reach your carrier rather than over a ship’s rail. Under CIF the seller pays freight and minimum insurance, but risk still passes in China and you clear customs and pay duty yourself.

What mill certificate should I require on a titanium order?

Require EN 10204 3.1 as the baseline, with a heat number hard-stamped on every piece, full measured chemistry including oxygen, nitrogen, hydrogen and carbon, measured tensile results, the product standard with its revision and the UNS grade. If you need 3.2, name the witnessing party and the hold points before manufacture; a 3.1 cannot be upgraded to a 3.2 afterwards.

Can you cut titanium to my drawing with no mill minimum?

Yes. From about 800 t of titanium, nickel and zirconium stock in Baoji we cut plate, tube, bar, fittings and flange to your dimensions with no mill minimum. One plate, one spool or a full kitted line is a normal order. Stock sizes can dispatch the same day, and fabricated items ship on a firm lead time quoted up front.

How quickly can I get a quote for a China titanium order?

Send the grade, standard, sizes, quantity, medium and drawing through our inquiry page and we confirm stock and pricing within 24 hours. A named engineer returns the grade split, the suggested PO wording and a dispatch date, so you can compare like-for-like quotes instead of chasing missing information.

Summary: Write the Clause Before You Ask for the Price

The melt, the certificate and the Incoterm decide the order long before the FOB number does. In 2026 Chinese titanium mill products carry a 15% general duty plus 25% under Section 301 — not a Section 232 tariff — while DFARS-covered defence articles need a US or qualifying-country melt and are outside what we can certify. Confirm the HTS subheading with your broker, fix the certificate type before manufacture, write the full Incoterm with a named place, and require a heat number on every piece. Then compare quotations on one basis. Open our request a quotation page with your grade, sizes, standard, quantity and drawing — we confirm stock and pricing within 24 hours, and stock sizes can dispatch the same day.

Cut-to-size Grade 2 <a href=https://www.sxqytd.com/product/titanium-plate.html target='_blank'>Titanium Plate</a> with heat numbers hard-stamped in Baoji stock

Need a quote on this specification?

Click below and your email app opens with the 6-point RFQ already typed out. Just fill in your grade, size and quantity - no form, no captcha.

Email your RFQ ›

Prefer the web form? Open the inquiry page and paste the 6 points into the message box.

Baoji Titanium Valley · ~800 t stock · cut-to-size · drawing-based machining · ASTM / ASME / GB · export-ready · same-day quote.