ASTM B265 is a standard specification for titanium and titanium alloy plate, published by the American Society for Testing and Materials (ASTM International). In this standard, GR2 represents high purity industrial grade titanium. Below is an overview of the standard tolerances and inspection methods for 3mm thick GR2 titanium plates:

Standard Tolerances:

According to ASTM B265 standard, the standard tolerance range for a 3mm thick GR2 titanium plate is:

• Thickness Tolerance: ±0.13mm

Inspection Methods:

1. Thickness Measurement: Use a digital caliper or a titanium plate thickness gauge to measure thickness at different locations along the titanium plate to ensure it falls within the specified range. Take measurements at least at three different positions and calculate the average.

2. Visual Inspection: Check the surface of the titanium plate for smoothness, absence of significant dents, defects, or cracks.

3. Chemical Composition Analysis: Employ chemical analysis methods such as Atomic Absorption Spectroscopy (AAS) or X-ray Fluorescence Spectrometry (XRF) to ensure the titanium plate conforms to the chemical composition requirements of GR2.

4. Mechanical Property Testing: This includes tensile testing, impact testing, etc., to ensure the titanium plate meets the mechanical property requirements specified in ASTM B265.

5. Coating Inspection (if applicable): If the titanium plate has a coating, check the adhesion, uniformity, etc., of the coating.

Considerations:

• Operator Skill: Operators should have the relevant skills and experience to ensure accurate measurement and inspection.

• Instrument Calibration: Ensure that the measurement and inspection instruments used are regularly calibrated to maintain accuracy.

• Sample Selection: Randomly select samples from the batch for inspection to represent the overall quality of the batch.

• Environmental Conditions: Conduct inspections under appropriate environmental conditions, avoiding factors such as humidity, temperature, etc., that could affect results.

• Safety Precautions: Exercise caution during mechanical property testing to avoid accidents.

Adhering to ASTM B265 standards for titanium plate inspection ensures that the quality meets requirements and enhances the reliability and sustainability of the product.

Shaanxi Qianyi Tuoda Technology Co., Ltd. www.sxqytd.com Tel：+8618829679311

• Titanium rod,China Shaanxi Qianyi Tuoda Technology Co.,Ltd.★★★ Titanium ,Nickel,Titanium Stirrer| Instrument Sensors|Russian Standard Titanium Plate BT1-0|American Standard Titanium Plate Grade2 | Chinese Standard Titanium Plate TA1 TA2 | Titanium Flanges | Titanium Fittings | Nickel Tubes | Titanium Tubes|Titanium Rod| Supplying Stirrer|Supplying Nickel|Supplying Titanium