According to ASTM B265 standard, the thickness tolerance for GR2 titanium plates can be determined according to Table 1. Typically, tolerances vary depending on the thickness of the plate and the method of production. Here's an example:

• For a 4mm thick titanium plate, the tolerance might be ±0.15mm (refer to ASTM B265 Table 1).

As for how to conduct the inspection and the precautions to take, these can be found detailed in the ASTM B265 standard. Generally, the inspection of titanium plates may include the following aspects:

1. Thickness Measurement: Use appropriate tools (such as a micrometer) to measure the thickness of the titanium plate, ensuring it falls within the allowable tolerance range.

2. Visual Inspection: Check for obvious defects on the surface of the titanium plate, such as cracks, dents, or surface irregularities.

3. Chemical Composition Analysis: Perform chemical composition analysis to ensure the titanium plate meets the requirements for Grade 2.

4. Mechanical Property Testing: Conduct tensile tests, hardness tests, etc., as required to verify the mechanical properties of the titanium plate.

During the inspection, it's important to consider the following:

• Strict Adherence to Standards: Ensure that operations are carried out according to the guidelines set forth in ASTM B265 to ensure the accuracy and reliability of the inspection.

• Use of Appropriate Equipment and Tools: Utilize calibrated measuring tools and equipment to ensure the accuracy of results.

• Safety Precautions: Take appropriate safety measures, especially during chemical composition analysis or mechanical property testing, to prevent accidents.

• Recordkeeping and Reporting: Record all data and results obtained during the inspection process and report them as necessary for traceability and review.

In summary, following the guidelines of ASTM B265 for the inspection of GR2 titanium plates is crucial to ensuring their quality and performance meet expectations.

Shaanxi Qianyi Tuoda Technology Co., Ltd. www.sxqytd.com Tel：+8618829679311

• Titanium forgings. Flange,China Shaanxi Qianyi Tuoda Technology Co.,Ltd.★★★ Titanium ,Nickel,Titanium Stirrer| Instrument Sensors|Russian Standard Titanium Plate BT1-0|American Standard Titanium Plate Grade2 | Chinese Standard Titanium Plate TA1 TA2 | Titanium Flanges | Titanium Fittings | Nickel Tubes | Titanium Tubes|Titanium Rod| Supplying Stirrer|Supplying Nickel|Supplying Titanium