All four images are of the actual lot, shot in Bay 3 on 2026-11-09. We do not use library photography.
Pickled · 21 coils · FOB 8.87 USD/kg
A firm quote needs thickness, size, quantity and destination port. Nothing here requires a phone call.
Gr2 is the balance point of the commercially pure family: about 30 % stronger than Gr1 without giving up the formability that makes it usable for welded tank work, and it keeps a wide corrosion margin in the media where stainless steels pit. Roughly two thirds of the plate we ship out of Baoji is Gr2, and most of it goes into vessels, ducting, tank linings and heat-exchanger service.
Where Gr2 is the wrong answer: above roughly 300 °C continuous service it loses strength faster than people expect, and it is not a structural grade. That is Gr5 or Gr9 territory. We will say so on the quote rather than sell you plate that fails a proof test.
| Element | Spec max |
|---|---|
| Ti + impurities | ≥ 99.0 % |
| Oxygen | 0.25 % |
| Iron | 0.30 % |
| Carbon | 0.08 % |
| Property | Spec min |
|---|---|
| UTS | 345 MPa |
| Yield Rp0.2 | 275 MPa |
| Elongation A₅₀ | 20 % |
Firm to valid to 2026-11-18 for the lot on the floor, FOB Shanghai, excluding Chinese VAT, at the FX reference on the quote. After that date — or if the lot is committed elsewhere — we re-quote.
Yes, zero-cutting from one piece, 500 mm minimum length. Adds two days and a per-cut charge stated on the quote.
Yes — SGS, TÜV or BV at your cost. Add about six working days for scheduling the witness. We have hosted 41 witness inspections since 2022.