Titanova Metals holds and processes titanium and nickel mill products in Baoji, Shaanxi — the cluster that produces most of China's titanium. This page exists so you can check the claims before you send a drawing, not after.
Make and model, because “advanced equipment” tells a purchasing engineer nothing.
| Machine | Capacity | Qty |
|---|---|---|
| Rolling mill, 4-high | to 2,000 mm width | 1 |
| Hydrostatic tube extruder | Ø12–219 mm | 2 |
| Multi-pass cold pilger | Ø6–76 mm | 3 |
| Vacuum annealing furnace | 2.5 t charge | 2 |
| CNC turning centres | Ø up to 630 mm | 6 |
| 4-axis machining centres | 800 × 500 × 600 | 4 |
| Wire EDM | 400 × 300 × 250 | 1 |
| GTAW / GMAW welding bays | purged backing | 5 |
| Pickling line | HF/HNO₃, closed loop | 1 |
| Instrument | Scope | Calibration |
|---|---|---|
| Optical emission spectrometer | full chemistry, per heat | annual, NIST-traceable |
| Universal tensile machine 100 kN | UTS, Rp0.2, elongation | annual |
| Ultrasonic testing bench | bar & tube, to 150 mm | annual |
| Eddy-current tester | seamless tube | annual |
| Hydrostatic test rig | to 40 MPa, per bundle | annual |
| Hardness tester (Brinell / Rockwell) | per lot | semi-annual |
| Coordinate measuring machine | ±0.005 mm, machined parts | annual |
| Salt-spray chamber | qualification only | annual |
Cert. 049-2024-Q-1187 · valid to 2027-08
Scope: rolling, drawing, machining of Ti & Ni mill products
NB/T 47010 conformity for flange forgings · reviewed annually
Independent I/E rights since 2016 · HS 8108.90 filings
We do not hold these. For aerospace or implant end-use, buy through a certified route — we will say so rather than oversell.
Every technical page carries one of these people. If a number on a datasheet is wrong, there is a name attached to it.
Owns grade datasheets, chemistry and mechanical ranges, and the selection-trap sections. Signs the MTCs.
Writes the machining, weld-filler and tolerance pages. Runs the four machining centres and the purged welding bays.
Owns packing, freight, documentation and the price index methodology. Handles the 41 hosted witness inspections.
We do not hold AS9100 and we will not sign a NADCAP flow-down. Flight-critical structural titanium needs a certified mill route.
We supply Gr23 / F136 bar and wire with per-heat traceability. We do not machine finished implants or hold ISO 13485.
If your drawing calls for them, we will tell you that rather than quote a lead time we cannot control.
Setup cost makes the unit price unreasonable, and we would rather lose the order than send you a number you cannot defend internally.
Started in 2014 as a machining shop taking offcuts from larger Baoji mills. The stock-holding side grew because buyers kept asking the same question — can you ship this week — and the mills would not answer it. We began carrying our own Gr2 plate and Gr5 bar in 2018 to be able to. Nickel came in 2021 when acid-recovery projects started specifying Ni200 plate and nobody local would hold it.
The technical pages started in 2024 because of a different problem: buyers were receiving Gr5 flanges ordered as “Grade 5 to B16.5” with an F2 CP facing, and nobody could point at a document that explained why. That is the standard we hold ourselves to now — if we cannot name the specification and the condition, we do not publish the number.
Certificate scans, a redacted MTC, the equipment list and the packing spec — one email, no newsletter, no drip campaign.